|Home||» Products||» PU Tubing and Recoil Hoses||» Trifly Oxygen Barrier Calibrated Tubes|
Trifly Oxygen Barrier Calibrated Tubes
This type of material is particularly indicated to realize tubes for systems for cold and hot water, for example for the distribution of hot and cold beverages, for ceiling and wall heating systems, for solar panels connection, in general for all the applications related to the transport of hot and cold water, inertness gas, air, where there is the necessity of the tube to resist at high and low temperatures.
NOTE : It’s recommended t o avoid the connection of polyethylene t ubes with fittings that deform too much the tube extremity, because this material doesn't resist to enlargements approximately over 15%. “Creep” problems could occur with not suitable fittings.
NORMS : the raw material used to produce these tubes is according to: D.M.
21.03.73 and following adjourments, Reg. UE n. 10/2011 dated 14/01/11,
Directive RoHS EEC 2011/65, ISO 17455:2005, DIN 4726:2000, DIN 4726:2008
STANDARD MARKING : I TRIFLY RAY™ 5.5x8 OXYGEN BARIER LOT…/.. UNI EN ISO 9001:2008
FOOD GRADE MADE IN ITALY
The marking is printed every 50cm. Customized marking on demand.
0.930 g/ cm 3
a 23°C 50% r.h.
+0 / +60°C
Elongation at break
-30 / +80°C