|Home||» Products||» Compressed Air Piping Solutions||» EQO Fluid 45 Degree Elbow|
EQO Fluid 45 Degree Elbow
As a prestigious manufacturer, trader and supplier, we are offering our clients a premium quality EQO Fluid 45 Degree Elbow in varied specifications. Made from top-notch raw material with cutting-edge technology, this EQO Fluid 45 Degree Elbow can be availed at market justified prices within promised time-frame.
LUTHRA PNEUMSYS offer Compressed Air Piping solutions using fittings from CMATIC and Eqo Fluids in India. The compressed air piping fittings system is used for the distribution of compressed air to the required point of use. It is a fairly designed system that helps in energy cost reduction and increase in production efficiency. Pneumsysenergy compressed air system is quick and easy to install and is used in various commercial and industrial facilities. Their smooth inner surfaces produces good air flow, energy savings and give optimum performance under pressure.
The compressed air requires to be delivered with appropriate quality, adequate volume, and pressure to accurately power the components that utilize the compressed air. Completely air tight and simple to mount, the range is ideal for installations requiring the highest quality air. These are energy efficient and do not require labor for installation.
Overall, the compressed air industry has not accepted any type of "plastic" pipe as appropriate and safe for down-stream compressed air. Also, Steel Pipe - in compressed air systems will corrode when exposed to condensate (H2O) and thus become a major source of contamination to the whole system. Luthra Pneumsys Compressed Air Piping solutions provide non-corrosive and contamination free working process.
Earlier, PVC was used for compressed air piping. It was not long before the fact that it sometimes shattered and failed, sending sharp pieces throughout the area. It becomes brittle over time and is not safe, can explode. It is not recommended for pressure. New products called aluminium air pipe were introduced that utilized material that did not shatter to solved safety issue.
The internal corrosion issue is much more significant with oil- free air than with lubricated compressors. Stainless steel is often lighter for the same pressure temperature rating and installs well when welded. Threaded stainless steel often tends to leak. Other piping has higher installation time, required skilled labour in fabrication for joining or welding / soldering / gluing like difficult and time consuming process. Leakage is also one of major problem detected in such piping comparative to Luthra Pneumsys Compressed Air Piping solutions. The corrosive skin protects aluminium pipes form most hazardous chemicals, many acids, moisture and weather conditions.
EQO Fluid's complete metal range for compressed airline -
EQO fluid fittings are aluminum pressure die-cast body and it is made in Spain. (durability is much better than competitors product). The griping system of EQO fluid fittings is in Conical SS ring and which will give better grip to the pipe (competitor is having SS flat ring for the grip). EQO fluid is the only one company is offering the push in fittings for high pressure applications up to 70 bar working pressure.
The pipes which we are providing is the REDRAWN ALUMINIUM ALLOYPIPE IN(T6-6063) GRADE.(competitors are giving extruded aluminum alloy). The pipes are made in India ref. to the EQO fluid standards to reduce the project cost. Pipes are PPE coated from outside and chromated from inside.
FITTINGS AS PER (USA STANDARD-AS ME B31.3 AND ASME B31.9 REQUIREMENTS)
PIPES (Made in India by Pneumsys for EQO fluid - UNI EN 755-2/UNI EN 515/UNI EN 573-3 STD)
For higher compressed air piping sizes, we are using Eqo Fluids fittings from 20 mm to 160 mm size. The aluminium pipes used are of thicker gauge than regular pipes. The Eqo fluids make High pressure fittings that are suitable to run at 70 bar operating pressure and have a burst pressure of 270 bar.
Pressures ranging beyond 15-17 Bar come under the category of High Pressure Piping. This can be in Compressed Air applications which are used for PET Blow molding Industry. Also, you could have the requirement for Nitrogen Gas for upto 40-50 bar pressure.
The Pipes are powder coated Dark Blue color and the shade varies from standard pressure piping which is of a lighter shade of Blue. Installations are Pan India and can be viewed on our Facebook page for more information.
Compressed Air Accessories
Compressed Air Accessories are essential additions while working on any air piping project. These quality accessories operate properly and efficiently. We offer different type of accessories that suit the requirement of several air fitting equipments in various specifications.
All these accessories are offered as a standard part of the package while starting any project. These accessories are good in quality and perform well while operation. They are either made or sourced from reputed manufacturers and quality checks done before installations at site at our works.
The Filters are used for the removal of noxious gases, harmful contaminants like water, oil and dirt from entering the internal part of the compressed air system. The filters are the modular components that are manufactured using graded carbon steel and are appreciated for extended element life. These filters works with improved performance and allow high air flow rate.